• Idiomas:
  • Português BR
  • English
Hoses

Fire hose type 01

Fire Hose Type 01, aimed at residential buildings, with textile reinforcement made 100% polyester high tenacity yarn, weaving horizontal (screen type), white in color with inner tube of synthetic rubber and endowed with unions type storz. Made respecting all the requirements of Standard ABNT NBR 11861. Available in 15, 20, 25 and 30 meters.

Cautions:

  • Prevent the passage of fire hose over sharp edges, sharp or pointed objects which could damage it.
  • Avoid falling unions.
  • Do not use the hose for any other purpose (wash garages, patios etc.) other than fire fighting.
  • Do not drag the hose without pressure. This causes holes in the crease.
  • Check that the line pressure is compatible with the pipe working pressure.
  • The fire hose should be used by trained personnel.

Inspection and Maintenance:

  • According to the NBR 12779, all fire hose should be inspected every 6 months and every 12 months subject to maintenance and hydrostatic test.
  • Hose length: it is extremely important to guarantee the application and the coverage area originally designed. After inspection, should only return to use hoses that show length up to 2% lower than the nominal length.
  • The maintenance includes the hydrostatic test activities reempatação, cleaning and drying, and even check abrasive wear and / or broken wires in the textile substrate, especially in the crease area, detachment of the outer shell, deformations in marriages from falls, blows or drag, no rubber seal in the coupling of unions or sealing to submit dryness, fission or cut, the presence of stains and / or debris on the outer surface, from contact with chemicals or petroleum products or difficulties to engage the engagement of unions.


Fire hose type 02

Fire hose type 02, meant to commercial buildings, industrial facilities and fire department, with textile reinforcement, made 100% in high tenacity polyester yarn, weaving diagonal (type twill), white in color with inner tube of synthetic rubber and endowed with unions type storz. Made respecting all the requirements of Standard ABNT NBR 11861. Available in 15, 20, 25 and 30 meters.

Caution:

  • Prevent the passage of fire hose over sharp edges, sharp or pointed objects which could damage it.
  • Avoid falling unions.
  • Do not use the hose for any other purpose (wash garages, patios etc.) other than fire fighting.
  • Do not drag the hose without pressure. This causes holes in the crease.
  • Check that the line pressure is compatible with the pipe working pressure.
  • The fire hose should be used by trained personnel.

Inspection and Maintenance:

  • According to the NBR 12779, all fire hose should be inspected every 6 months and every 12 months subject to maintenance and hydrostatic test.
  • Hose length: it is extremely important to guarantee the application and the coverage area originally designed. After the inspection, should only return to use hoses that show length up to 2% lower than the nominal length.
  • The maintenance comprises the hydrostatic test activities reempatação, cleaning and drying, and even check abrasive wear and / or broken wires in the textile substrate, especially in the crease area, detachment of the outer shell, deformations in marriages from falls , strokes or drag, no rubber seal in the coupling of unions or sealing to submit dryness, fission or cut, the presence of stains and / or debris on the outer surface, from contact with chemicals or petroleum products or difficulties to engage the engagement of unions.


Fire hose type 03

Fire hose type 03, for the naval environment, industrial facilities and fire department. double textile reinforced, made in 100% polyester yarn high tenacity, weaving diagonal (type twill), white in color with inner tube of synthetic and endowed with unions type storz rubber. Made with any requirements of the Standard ABNT NBR 11861. Available in 15, 20, 25 and 30 meters.

Caution:

  • Avoid the passage of fire hose over sharp edges, sharp or sharp objects that could damage it.
  • Avoid falling unions.
  • Do not use the hose for any other purpose (wash garages, patios etc.) other than fire fighting.
  • Do not drag the hose without pressure. This causes holes in the crease.
  • Check the pressure in the line is compatible with the hose working pressure.
  • A fire hose should be used by trained personnel.

Inspection and Maintenance:

  • According to the NBR 12779, all fire hose should be inspected every 6 months and every 12 months subject to maintenance and hydrostatic test.
  • Hose length: it is extremely important to guarantee the application and the coverage area originally designed. After inspection, should only return to use hoses that show length up to 2% lower than the nominal length.
  • The maintenance includes the hydrostatic test activities reempatação, cleaning and drying, and even check abrasive wear and / or broken wires in the textile substrate, especially in the crease area, detachment of the outer shell, deformations in marriages from falls, blows or drag, no rubber seal in the coupling of unions or sealing to submit dryness, fission or cut, the presence of stains and / or debris on the outer surface, from contact with chemicals or petroleum products or difficulties to engage the engagement of unions .


Fire hose type 04

Fire hose type 04, for the industrial, textile reinforced made 100% in high tenacity polyester yarn, with outer covering of PVC and nitrile rubber, red in color with inner tube of synthetic and endowed with unions type storz rubber. Possess high resistance to abrasion and chemicals. Made respecting all the requirements of Standard ABNT NBR 11861. Available in 15, 20, 25 and 30 meters.

Caution:

  • Prevent the passage of fire hose over sharp edges, sharp or pointed objects which could damage it.
  • Avoid falling unions.
  • Do not use the hose for any other purpose (wash garages, patios etc.) other than fire fighting.
  • Do not drag the hose without pressure. This causes holes in the crease.
  • Check that the line pressure is compatible with the pipe working pressure.
  • The fire hose should be used by trained personnel.

Inspection and Maintenance:

  • According to the NBR 12779, all fire hose should be inspected every 6 months and every 12 months subject to maintenance and hydrostatic test.
  • Hose length: it is extremely important to guarantee the application and the coverage area originally designed. After inspection, should only return to use hoses that show length up to 2% lower than the nominal length.
  • The maintenance includes the hydrostatic test activities reempatação, cleaning and drying, and even check abrasive wear and / or broken wires in the textile substrate, especially in the crease area, detachment of the outer shell, deformations in marriages from falls, blows or drag, no rubber seal in the coupling of unions or sealing to submit dryness, fission or cut, the presence of stains and / or debris on the outer surface, from contact with chemicals or petroleum products or difficulties to engage the engagement of unions.


Fire hose type 05

Fire hose 05 type, aimed at industrial plants, whose needs include greater resistance. With textile reinforcement in synthetic yarn of high tenacity, with outer shell and inner tube in nitrile rubber, in black and equipped with unions type storz color. Greater resistance to chemicals, cuts and punctures. Possess high resistance to abrasion and hot surfaces. Made respecting all the requirements of Standard ABNT NBR 11861.

Caution:

  • Prevent the passage of fire hose over sharp edges, sharp or pointed objects which could damage it.
  • Avoid falling unions.
  • Do not use the hose for any other purpose (wash garages, patios etc.) other than fire fighting.
  • Do not drag the hose without pressure. This causes holes in the crease.
  • Check that the line pressure is compatible with the pipe working pressure.
  • The fire hose should be used by trained personnel.

Inspection and Maintenance:

  • According to the NBR 12779, all fire hose should be inspected every 6 months and every 12 months subject to maintenance and hydrostatic test.
  • Hose length: it is extremely important to guarantee the application and the coverage area originally designed. After inspection, should only return to use hoses that show length up to 2% lower than the nominal length.
  • The maintenance includes the hydrostatic test activities reempatação, cleaning and drying, and even check abrasive wear and / or broken wires in the textile substrate, especially in the crease area, detachment of the outer shell, deformations in marriages from falls, blows or drag, no rubber seal in the coupling of unions or sealing to submit dryness, fission or cut, the presence of stains and / or debris on the outer surface, from contact with chemicals or petroleum products or difficulties to engage the engagement of unions.

“If I made valuable discoveries, but was to have patience than any other talent.” - Isaac Newton

All Rights Reserved
Top